make a DIY purse

Make a purse frame pattern by drawing around the external edge of the frame; draw the shape of the rest of the bag. Cut two pieces of fabric and two pieces fabric, and two pieces of interfacing and also of heavy weight sew interfacing. 

But no matter how much I search, there simply to be any store of carrying more than a few frames at a time. Creating a sandwich with the outer pieces right sides together in the piece of sew in interfacing either side. 

Image of source : thecrimsonrabbit

Show you an easy way to draft your own pattern piece so that no matter your frame has a purse that fits in it perfectly. The pattern of the interface and pins is downward from this point, and the bottom and back are marked upwards on the other side. Draw guide lines around the edges to ensure straight stitching.

Once the ten minutes has elapsed insert the bag into one side by the hinge and pull the fabric edge right into the top corner to ensure the fabric is in the frame. The bottom and the hinge marking to create a flat bottom for the purse take one of the corners of the bag and match the side seam with the bottom seam line. 

Image of source : aliexpress.com

Your frame around the corner point so that it is from the vertical line that you drew and mark where the very bottom of the hinge. The marked line and repeat for the other bottom corner of the exterior then turn the exterior bag right side.

With right side out, place the exterior bag into the lining. The right sides of the exterior bag should now be touching. Line up the top and pin from hinge mark up and top edge. You end up with that little fold that will cover the bottom of your hinges and make it nice and easy to open the purse without putting too much tension on the fabric a little more. Press around the top edge to get the creases out. A bead of glue around the back groove on one side of the bag frame, Try not to get glue on the fabric.